Tennessee Bleacher Repair
Bleacher Inspection Process
When contacted to perform an inspection, you receive the most comprehensive and detailed inspection in the industry. All bleacher inspections are completed by trained and certified professional technicians and include the following:
Frame Inspection
Inspect columns, cantilever arms, caster horns, wheel pins, tier catches (row locks), guide rods, upper and lower guides, stop pins, lift angles, floor and wall attachments, wall bucks and all frame welds
Deck Inspection
Inspect deck nosing, riser beams, end caps, deck supports and deck support wheels, section connectors, diagonal bracing, cross and tension bracing, brace connections, frame connections, outrigger, hinges, truncation supports (if applicable), handles, end panels, warning plates, chairs/ bench seating, seat supports, seat boards and riser boards
Step Inspection
Inspect transition and intermediate steps, step hinges, step end caps, rubber pads, step lighting, step connections and safety walk tape
Rail Inspections
Inspect end rails, front rails, rear rails, aisle step rails, rail socket attachments, hardware (set screws), socket and rail welds
Electrical Inspections
Inspect wiring and wire harness, disconnects, contactors, fuses, circuit breakers, receptacles, plug adapters, aisle lights and wiring, transformers, limit switches, delay switches, relay boxes, junction boxes, pendant control and receptacle box.
Power Inspections
Depending upon the age, model and brand of bleacher, power inspections vary based upon the actual power system of each bleacher. Details follow:
Friction drive systems
Inspect motor and gearbox, bearings, roller chain, master links, drive wheels, drive shafts, weights, torsion springs, mounting brackets, motor alignment and weight adjustments.
Power frame system
Inspect motor and gearbox, bearings, roller chain, master links, drive wheels, drive shafts, weights, torsion tubes, spacer plates, torsion springs, mounting brackets, motor alignment and weight adjustments.
Power assist system
Inspect motor and gearbox, bearings, roller chain, master links, drive wheels, drive shafts, and electrical cords.
Chain drive system
Inspect motor and gearbox, bearings, roller chain, master links, roller wheels, drive shafts, sprockets, chain link hinge and hinge pins, chain links, mounting brackets, floor connections and motor alignment, adjustments to chain drum.